600V vs 120/208V: Understanding Power Systems in Commercial and Industrial Buildings

Circuit breakers and wiring inside a 3-phase distribution panel

If you are leasing a new unit, buying equipment or planning an expansion, you will run into voltages like 600V, 347/600V and 120/208V. These numbers decide what equipment you can connect, whether you need a transformer and how much an upgrade will involve. Here is a plain-language guide for owners and facility managers in Ontario.

The common building power systems in Ontario

120/240V single-phase

The standard in houses and many small shops. It suits lighting, receptacles and small appliances, but it is not designed for larger motors and commercial equipment.

120/208V three-phase

Common in smaller commercial buildings, plazas and offices. It provides 120V for receptacles and lighting, and 208V for equipment such as rooftop units, commercial kitchen appliances and some machinery. It is also what most step-down transformers produce inside larger buildings.

347/600V three-phase

The workhorse of larger commercial and industrial buildings in Canada. The 600V supply feeds motors, compressors, HVAC equipment and production machinery efficiently, while 347V is widely used for commercial lighting. Equipment for these systems is usually nameplated at 575V or 600V.

Why larger buildings use 600V

For the same amount of power, a higher voltage means less current. Less current means smaller conductors, less voltage drop over long runs and lower losses. That is why factories, warehouses and large commercial buildings distribute power at 600V and step it down only where needed.

Where step-down transformers come in

A 600V building still needs 120V for receptacles, office equipment and many smaller loads. A dry-type step-down transformer, typically 600V to 120/208V, feeds a separate panel for these circuits. Transformers need correct sizing, protection, ventilation and clearances. See transformer installation for what is involved.

Matching equipment to your building

  • Check the nameplate: voltage, phase and full-load amps decide what the machine needs.
  • Watch for imported equipment: machines built for 480V markets will not match a 600V system without a transformer.
  • Single-phase vs three-phase: a three-phase machine cannot run properly on a single-phase supply without a converter, and that is rarely the best answer for production equipment.
  • Approval markings: equipment connected in Ontario must be certified for use in Canada (for example CSA or cUL) or go through a field evaluation.

Signs your building needs an upgrade

  • New machinery or HVAC equipment needs a voltage or capacity the building does not have
  • Breakers trip as equipment is added
  • Panels are full, or the service is close to its rated capacity
  • You are moving from a 120/208V unit into production work that needs 600V

We handle 3-phase and 600V electrical work, panel and service upgrades and machine connections across Toronto, Vaughan, Mississauga and the GTA.

Related services

Talk to a licensed electrical contractor

North York Electrical Inc. has served businesses, facilities and homeowners across the Greater Toronto Area since 1996. We are ESA-licensed (#7011426), insured and WSIB-covered, estimates are free, and we offer 24/7 emergency service, 365 days a year. Call (647) 990-2696 or send us your project details.

Facebook
Twitter
LinkedIn
Email